The Commission shall inform the European standardisation body concerned and, if necessary, request the revision of the harmonised standards concerned. Changes in product design or characteristics and changes in the harmonised standards or in technical specifications by reference to which conformity of EEE is declared shall be adequately taken into account; manufacturers keep a register of non-conforming EEE and product recalls, and keep distributors informed thereof; manufacturers ensure that their EEE bears a type, batch or serial number or other element allowing its identification, or, where the size or nature of the EEE does not allow it, that the required information is provided on the packaging or in a document accompanying the EEE; manufacturers indicate their name, registered trade name or registered trade mark and the address at which they can be contacted on the EEE or, where that is not possible, on its packaging or in a document accompanying the EEE. Mercury in single capped (compact) fluorescent lamps not exceeding (per burner): For general lighting purposes < 30 W: 5 mg, Expires on 31 December 2011; 3,5 mg may be used per burner after 31 December 2011 until 31 December 2012; 2,5 mg shall be used per burner after 31 December 2012, For general lighting purposes ≥ 30 W and < 50 W: 5 mg, Expires on 31 December 2011; 3,5 mg may be used per burner after 31 December 2011, For general lighting purposes ≥ 50 W and < 150 W: 5 mg, For general lighting purposes ≥ 150 W: 15 mg, For general lighting purposes with circular or square structural shape and tube diameter ≤ 17 mm, No limitation of use until 31 December 2011; 7 mg may be used per burner after 31 December 2011. The obligations laid down in point (a) of Article 7 and the drawing up of technical documentation shall not form part of the authorised representative’s mandate; an authorised representative performs the tasks specified in the mandate received from the manufacturer. further to a reasoned request from a competent national authority, provide that authority with all the information and documentation necessary to demonstrate the conformity of an EEE with this Directive. 占い師を希望するならいつで声をかけて下さい。厳しいですが一流鑑定士にも育てますよ。 Mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for special purposes not exceeding (per lamp): No limitation of use until 31 December 2011; 3,5 mg may be used per lamp after 31 December 2011, No limitation of use until 31 December 2011; 5 mg may be used per lamp after 31 December 2011, No limitation of use until 31 December 2011; 13 mg may be used per lamp after 31 December 2011, Mercury in other low pressure discharge lamps (per lamp). Council Resolution of 25 January 1988 on a Community action programme to combat environmental pollution by cadmium (6) invited the Commission to pursue without delay the development of specific measures for such a programme. It shall take effect immediately or at a later date specified therein. The placing on the market of medical devices requires a conformity assessment procedure, according to Council Directive 93/42/EEC of 14 June 1993 concerning medical devices (13) and Directive 98/79/EC of the European Parliament and of the Council of 27 October 1998 on in vitro diagnostic medical devices (14), which could require the involvement of a notified body designated by competent authorities of Member States. Current consolidated version: 01/09/2020, ELI: http://data.europa.eu/eli/dir/2011/65/oj, DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL, on the restriction of the use of certain hazardous substances in electrical and electronic equipment. the total negative environmental, health and consumer safety impacts caused by substitution are likely to outweigh the total environmental, health and consumer safety benefits thereof. 管理人の権限において、新規登録される方（既存も含む）は受け付けません。仮に、登録されても削除しますので、よろしくお願いします。 利用規約から一部抜粋 ”ブログ村の中にある「テーマ（トラコミュ）」について、ブログ同士のやりとりではなく、交流するしないは当然当事者の判断です。” つまり、他人の作成した「テーマ（トラコミュ）」を勝手に使用することは、いかがなものか!? 2011/06/06. The existing exemption shall remain valid until a decision on the renewal application is taken by the Commission. The market surveillance mechanisms laid down by Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products (16) provide the safeguard mechanisms to check compliance with this Directive. In accordance with paragraph 34 of the Interinstitutional Agreement on better law-making (18), Member States are encouraged to draw up, for themselves and in the interests of the Union, their own tables, which will, as far as possible, illustrate the correlation between this Directive and their transposition measures, and to make those tables public. This Directive shall enter into force on the 20th day following its publication in the Official Journal of the European Union. 当分は無料で予想もして、競馬の勝ち方も教える事が出来れば最高かな・って思ったりして、そして儲かる同士が出来て競馬場の近くの立ち飲みや当たりで、競馬を題材に一杯のお酒でも飲めたら人生が何か最高にエンジョィになるようにも思えてきます。 By drawing up the EU declaration of conformity, the manufacturer shall assume responsibility for the compliance of the EEE with this Directive. Human health also has to be protected and an overall strategy that in particular restricts the use of cadmium and stimulates research into substitutes should therefore be implemented. 3. In the interest of clarity, that Directive should be recast. 「Nicheee！｜ニッチー！」はテレビ番組リサーチ会社【株式会社フルタイム】による情報サイトです。面白いネタやニュース、最新情報を、テレビ業界ではたらくリサーチャーの視点を交えてジャンルを問わず発信しています。 Mercury in very high accuracy capacitance and loss measurement bridges and in high frequency RF switches and relays in monitoring and control instruments not exceeding 20 mg of mercury per switch or relay. A number of substantial changes are to be made to Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (4). In addition, the definition of ‘electrical and electronic equipment’ should be complemented by a definition of ‘dependent’, to cover the multipurpose character of certain products, where the intended functions of EEE are to be determined on the basis of objective characteristics, such as the design of the product and its marketing. 1. 3. Regulation (EC) No 850/2004 of the European Parliament and of the Council of 29 April 2004 on persistent organic pollutants (7) recalls that the objective of protecting the environment and human health from persistent organic pollutants cannot be sufficiently achieved by the Member States, owing to the transboundary effects of those pollutants, and can therefore be better achieved at Union level. Mercury in other fluorescent lamps not exceeding (per lamp): Linear halophosphate lamps with tube > 28 mm (e.g. If, on expiry of the period referred to in paragraph 1, neither the European Parliament nor the Council has objected to the delegated act it shall be published in the Official Journal of the European Union and shall enter into force on the date stated therein. To this end, the review and amendment of the list of restricted substances in Annex II should be coherent, maximise synergies with, and reflect the complementary nature of the work carried out under other Union legislation, and in particular under Regulation (EC) No 1907/2006 while ensuring the mutually independent operation of this Directive and that Regulation. ブログのトラックバック集です。 Pursuant to that Regulation, releases of persistent organic pollutants, such as dioxins and furans, which are unintentional by-products of industrial processes, should be identified and reduced as soon as possible with the ultimate aim of elimination, where feasible. 1. 今年は、前回の秋華賞で断然の1番人気に支持されながらも、不運な降着で連にも絡めなかった3歳女傑ブエナビスタが雪辱参戦。 2. piezoelectronic devices, or in a glass or ceramic matrix compound, Lead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher, Lead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC, Expires on 1 January 2013 and after that date may be used in spare parts for EEE placed on the market before 1 January 2013, Cadmium and its compounds in one shot pellet type thermal cut-offs, Expires on 1 January 2012 and after that date may be used in spare parts for EEE placed on the market before 1 January 2012, Cadmium and its compounds in electrical contacts, Hexavalent chromium as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators up to 0,75 % by weight in the cooling solution, Lead in bearing shells and bushes for refrigerant-containing compressors for heating, ventilation, air conditioning and refrigeration (HVACR) applications, Lead used in C-press compliant pin connector systems, May be used in spare parts for EEE placed on the market before 24 September 2010, Lead used in other than C-press compliant pin connector systems, Lead as a coating material for the thermal conduction module C-ring, Lead in white glasses used for optical applications, Cadmium and lead in filter glasses and glasses used for reflectance standards, Lead in solders consisting of more than two elements for the connection between the pins and the package of microprocessors with a lead content of more than 80 % and less than 85 % by weight, Expired on 1 January 2011 and after that date may be used in spare parts for EEE placed on the market before 1 January 2011, Lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages, Lead in linear incandescent lamps with silicate coated tubes, Lead halide as radiant agent in high intensity discharge (HID) lamps used for professional reprography applications, Lead as activator in the fluorescent powder (1 % lead by weight or less) of discharge lamps when used as speciality lamps for diazoprinting reprography, lithography, insect traps, photochemical and curing processes containing phosphors such as SMS ((Sr,Ba)2MgSi2O7:Pb), Lead as activator in the fluorescent powder (1 % lead by weight or less) of discharge lamps when used as sun tanning lamps containing phosphors such as BSP (BaSi2O5:Pb), Lead with PbBiSn-Hg and PbInSn-Hg in specific compositions as main amalgam and with PbSn-Hg as auxiliary amalgam in very compact energy saving lamps (ESL), Lead oxide in glass used for bonding front and rear substrates of flat fluorescent lamps used for Liquid Crystal Displays (LCDs), Lead and cadmium in printing inks for the application of enamels on glasses, such as borosilicate and soda lime glasses, Lead in finishes of fine pitch components other than connectors with a pitch of 0,65 mm and less, Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors, Lead oxide in surface conduction electron emitter displays (SED) used in structural elements, notably in the seal frit and frit ring, Lead oxide in the glass envelope of black light blue lamps, Lead alloys as solder for transducers used in high-powered (designated to operate for several hours at acoustic power levels of 125 dB SPL and above) loudspeakers, Lead bound in crystal glass as defined in Annex I (Categories 1, 2, 3 and 4) of Council Directive 69/493/EEC (1), Cadmium alloys as electrical/mechanical solder joints to electrical conductors located directly on the voice coil in transducers used in high-powered loudspeakers with sound pressure levels of 100 dB (A) and more, Lead in soldering materials in mercury free flat fluorescent lamps (which, e.g. Cases in which obligations of manufacturers apply to importers and distributors. Mercury in double-capped linear fluorescent lamps for general lighting purposes not exceeding (per lamp): Tri-band phosphor with normal lifetime and a tube diameter < 9 mm (e.g. Even if waste EEE were collected separately and submitted to recycling processes, its content of mercury, cadmium, lead, chromium VI, polybrominated biphenyls (PBB) and polybrominated diphenyl ethers (PBDE) would be likely to pose risks to health or the environment, especially when treated in less than optimal conditions. 2. 1. For the exemptions listed in Annex III as at 21 July 2011, the maximum validity period, which may be renewed, shall, for categories 1 to 7 and 10 of Annex I, be 5 years from 21 July 2011 and, for categories 8 and 9 of Annex I, 7 years from the relevant dates laid down in Article 4(3), unless a shorter period is specified. Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment Text with EEA relevance. For the exemptions listed in Annex IV as at 21 July 2011, the maximum validity period, which may be renewed, shall be 7 years from the relevant dates laid down in Article 4(3), unless a shorter period is specified. This Directive should be without prejudice to the obligations of the Member States relating to the time-limits for transposition into national law and application of the Directive set out in Annex VII, Part B. Categories of EEE covered by this Directive. Materials, components and EEE on which tests and measurements demonstrating compliance with the requirements of Article 4 have been performed, or which have been assessed, in accordance with harmonised standards, the references of which have been published in the Official Journal of the European Union, shall be presumed to comply with the requirements of this Directive. Where that is not possible or not warranted on account of the nature of the EEE, it shall be affixed to the packaging and to the accompanying documents. 「見逃すな！この秋の女王決定戦！」 ・テキストリンクに変更されたい方は、以下のテキストに変更いただき掲載してください。 Having regard to the Treaty on the Functioning of the European Union, and in particular Article 114 thereof. Where other applicable Union legislation contains provisions for the affixing of the importer’s name and address which are at least as stringent, those provisions shall apply; importers, in order to ensure compliance with this Directive, keep a register of non-compliant EEE and EEE recalls, and keep distributors informed thereof; importers who consider or have reason to believe that an EEE which they have placed on the market is not in conformity with this Directive immediately take the corrective measures necessary to bring that EEE into conformity, to withdraw it or recall it, as appropriate, and immediately inform the competent national authorities of the Member States in which they made the EEE available to that effect, giving details, in particular, of the non-compliance and of any corrective measures taken; importers keep, for 10 years following the placing on the market of the EEE, a copy of the EU declaration of conformity at the disposal of the market surveillance authorities and ensure that the technical documentation can be made available to those authorities, upon request; importers, further to a reasoned request from a competent national authority, provide it with all the information and documentation necessary to demonstrate the conformity of an EEE with this Directive in a language which can be easily understood by that authority, and that they cooperate with that authority, at its request, on any action taken to ensure compliance with this Directive of EEE which they have placed on the market.